Images may not represent actual product and finish

Hafele 003.15.022

Your Price: $224.86

Retail Price:$299.81

You Save:$74.95(25%)

Titebond II, Extend Wood Glue, 5 gallons

Part Number: HAF_00315022

Availability: Ready to Ship

Description
Specification

Hafele 003.15.022 Titebond II

APPLICATION GUIDELINES Application temperature: Above 40°F Assembly time after glue application: 15 minutes (70°F/50% RH) Minimum required spread: 7 mils (typical) Required clamping pressure: Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods). Methods of application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications. Cleanup: Damp cloth while glue is wet. Scrape off dried excess. BOND STRENGTH ASTM D-905 (On Hard Maple) Temperature Strength psi % wood failure Room Temperature 3,510 81 150°F Overnight 3,210 61 LIMITATIONS Not intended for exterior use or where moisture is likely. For exterior applications use Titebond II Premium Wood Glue. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. It is recommended that Titbond Extend Wood Glue not be stored for extended periods at temperatures lower than 40°. NOTE: KEEP FROM FREEZING.
Excellent sandability
Heat and solvent-resistant
Passes Type II water-resistance testing
Slower speed of set – longer open time
APPLICATION GUIDELINES Application temperature:Above 40°F Assembly time after glue application: 15 minutes (70°F/50% RH) Minimum required spread: 7 mils (typical) Required clamping pressure: Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods). Methods of application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications. Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess. BOND STRENGTH ASTM D-905 (On Hard Maple) Temperature Strength psi % wood failure Room Temperature 3,510 81 150° Overnight 3,210 61 LIMITATIONS Not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 55°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. Not FDA approved for indirect food contact. Read MSDS before use. KEEP FROM FREEZING KEEP OUT OF THE REACH OF CHILDREN

Attributes

Ship via: Can Ship UPS

Capacity: (5 Gallons) 18.9 l