Hafele 003.15.061 Titebond III Ultimate Wood GlueHafele 003.15.061 Titebond III, Ultimate Wood Glue offers unparalleled performance for woodworking professionals and enthusiasts alike. This 1-gallon adhesive is designed to meet the stringent ANSI/HPVA Type I specifications, ensuring waterproof durability while providing superior strength for your projects. With a longer open time, this glue allows for more flexibility during assembly, making it ideal for intricate applications. Engineered to resist solvents, heat, and mildew, Titebond III remains unaffected by finishes, allowing for a clean and professional look. Cleanup is a breeze with water, and the non-toxic formula is FDA approved for indirect food contact, making it safer than traditional waterproof glues. Application is optimized with guidelines recommending temperatures above 47°F. It features an open assembly time of 8-10 minutes and a total assembly time of 20-25 minutes at 70°F and 50% relative humidity. The minimum required spread is approximately 250 square feet per gallon, and the recommended clamping pressures vary based on wood type. Please note, this adhesive is not suitable for continuous submersion or structural applications. For best results on exotic and oily woods, consult Hafele’s Technical Support Team. Store below 75°F to maintain product integrity and avoid freezing.
Titebond III, Ultimate Wood Glue
1 gallon
Waterproof – Passes ANSI/HPVA Type I Specification Superior strength Longer open time Lower application temperature Resists solvents, heat and mildew Unaffected by finishes Water cleanup & Non-toxic FDA approved for indirect food contact Sands easily without softening Safer than traditional waterproof glues
APPLICATION GUIDELINES Application temperature:Above 47°F Open assembly time: 8-10 minutes (70°F/50% RH) Total assembly time: 20-25 minutes (70°F/50% RH) Minimum required spread: Approximately 6 mils or 250 square feet per gallon. Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods). Methods of application: Plastic bottles for fine applications; glue may also spread with a roller spreader or brush. Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess. BOND STRENGTH ASTM D-905 (On Hard Maple) Temperature Strength psi % wood failure Room Temperature 4,000 57 150° Overnight 800 0 LIMITATIONS Not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 45°F. Store product below 75°. Storage above this temperature may cause product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping the bottle on a hard a surface until the product is restored to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exterior doors or exotic and oily woods, please contact our Technical Support Team at 1-800-347-4583. Read MSDS before use. KEEP FROM FREEZING KEEP OUT OF THE REACH OF CHILDREN
Attributes
Ship via: Can Ship UPS
Capacity: 1 gallon
Resources