Hafele 003.15.063 Titebond III Ultimate Wood GlueHafele 003.15.063 Titebond III, Ultimate Wood Glue offers unparalleled performance for your woodworking projects. With a generous capacity of 2.15 gallons, this advanced formula is waterproof and meets the ANSI/HPVA Type I Specification, ensuring durability and reliability even in challenging environments. It boasts superior strength and a longer open time, allowing you to work at your own pace without compromising on quality. Designed for versatility, this wood glue resists solvents, heat, and mildew, making it an excellent choice for both indoor and outdoor applications. It is non-toxic and FDA-approved for indirect food contact, making it safer than traditional waterproof glues. Cleanup is a breeze with water, and it sands easily without softening, ensuring a smooth finish. Application guidelines recommend using the glue at temperatures above 47°F, with an open assembly time of 8-10 minutes at 70°F and 50% relative humidity. Clamping pressure should be sufficient to join the surfaces tightly, with specific ranges for different wood types. For optimal results, especially with exterior doors or exotic woods, consulting Hafele’s Technical Support Team is advisable. Keep this product away from freezing and out of reach of children for safety and best performance.
Titebond III, Ultimate Wood Glue
2.15 gallons
Waterproof – Passes ANSI/HPVA Type I Specification Superior strength Longer open time Lower application temperature Resists solvents, heat and mildew Unaffected by finishes Water cleanup & Non-toxic FDA approved for indirect food contact Sands easily without softening Safer than traditional waterproof glues
APPLICATION GUIDELINES Application temperature:Above 47°F Open assembly time: 8-10 minutes (70°F/50% RH) Total assembly time: 20-25 minutes (70°F/50% RH) Minimum required spread: Approximately 6 mils or 250 square feet per gallon. Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods). Methods of application: Plastic bottles for fine applications; glue may also spread with a roller spreader or brush. Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess. BOND STRENGTH ASTM D-905 (On Hard Maple) Temperature Strength psi % wood failure Room Temperature 4,000 57 150° Overnight 800 0 LIMITATIONS Not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 45°F. Store product below 75°. Storage above this temperature may cause product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping the bottle on a hard a surface until the product is restored to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exterior doors or exotic and oily woods, please contact our Technical Support Team at 1-800-347-4583. Read MSDS before use. KEEP FROM FREEZING KEEP OUT OF THE REACH OF CHILDREN
Attributes
Ship via: Can Ship UPS
Capacity: 2.15 gallons
Resources