Hafele 003.50.192 Titebond Pro Heavy-Duty Construction AdhesiveHafele 003.50.192 Titebond, Pro Heavy Duty Construction Adhesive is the ultimate solution for robust bonding in challenging conditions. This 10 oz adhesive is engineered to bond a wide range of materials, including wood, metal, brick, marble, ceramic tile, concrete, drywall, and even wet, frozen, or treated lumber. Its unique formulation reduces the need for excessive nailing and effectively eliminates squeaky floors, making it an essential tool for both professionals and DIY enthusiasts. With excellent water resistance and a permanently flexible bond, this adhesive exceeds the performance standards set by the American Plywood Association AFG-01 Specification and ASTM D3498 and C557. The ideal application temperature ranges from 0°F to 100°F, with service temperatures spanning -20°F to 120°F. For optimal results, surfaces should be clean and free from contaminants, and application is straightforward using a cartridge or caulking gun. The working time for a 1/4" bead is approximately 20-30 minutes, allowing for precise adjustments before setting. Cleanup is easy with acetone or mineral spirits, following proper safety precautions. Please note that this adhesive is not suitable for continuous submersion or for use on polystyrene foam, vinyl-coated drywall, or rigid plastics. For those materials, consider using Titebond Interior/Exterior Construction Adhesive.
Titebond, Pro Heavy Duty Construction Adhesive
10 oz
Ideal for bonding wood, metal, brick, marble, ceramic tile, concrete, drywall and wet, frozen and treated lumber Designed for wet, frozen or treated lumber and ideal for metal, brick, concrete, ceramics and most large-panel substrates Reduces the amount of nailing and helps eliminate squeaky floors Excellent water-resistance and permanently flexible Exceeds the performance requirements of the American Plywood Association AFG-01 Specification, ASTM D3498 and ASTM C557, HUD/FHA Use of Materials Bulletin #60
APPLICATION GUIDELINES Application temperature: 0°F to 100°F Service temperatures: -20°F to 120°F Methods of application: Cartridge/caulking gun Coverage (maximum): Approximately length of bead according to bead diameter. Working time: Approx. 20-30 minutes for a 1/4" bead. Working surfaces: Surfaces to be bonded should be clean and free from excessive oil, grease, water, dirt or any other material that may deter adhesion. Apply Titebond Heavy Duty Construction Adhesive to only one of the surfaces to be bonded. NOTE: When bonding subfloors or wet, frozen and treated lumber, nail or screw as recommended by the American Plywood Association. Cleanup: Tools/adhesive may be cleaned with acetone or mineral spirits. Follow solvent vendor’s precautions when using solvents. Note Test solvent on an out-of-the-way area to make sure it will not mar or attack surface. LIMITATIONS Not designed for continous submersion or for our use on polystyrene foam, vinyl-coated drywall or rigid plastics. For polystyrene foam, tub surrounds and most other plastics, we recommend Titebond Interior/Exterior Construction Adhesive.
Attributes
Ship via: Can Ship UPS
Capacity: 10 oz
Resources