Hafele 003.50.287 Titebond Instant Bond AcceleratorHafele 003.50.287 Titebond, Instant Bond Accelerator is an essential companion for Titebond®'s Instant Bond adhesives, designed to enhance bonding performance and reduce assembly times. With an application temperature above 50°F (10°C), this heptane-based aerosol spray excels in providing immediate results at 70°F with 50% relative humidity. The accelerator promotes faster, uniform curing, particularly beneficial for porous materials like wood and for bonding acidic surfaces or in low humidity conditions. This clear liquid boasts a specific gravity of 0.79 and a viscosity of 3 cps, making it both lightweight and efficient. Its reactive VOC level is 720 g/L, with a flashpoint of 15°F, underscoring the importance of safe handling. Store this product in a cool, dry location, as it retains stability for up to 24 months in unopened containers. However, be mindful of its highly flammable nature and ensure positive cross ventilation during use. Titebond® Instant Bond Accelerator allows for gap filling up to 0.20 inches, ensuring a strong bond even in challenging conditions. Keep it away from heat sources, and always follow safety precautions to ensure a safe and effective bonding experience.
Titebond, Instant Bond Accelerator
APPLICATION GUIDELINES Application temperature: Above 50°F (10°C) Assembly Time After Application: Immediate (70°F: 50% RH) Method of Application: Aerosol spray can Time: Heptane-based accelerator Reactive VOC: 720 g/L State: Liquid Weight Per Gallon: 6.59 lbs Color: Clear Flashpoint: 15°F Viscosity: 3 cps Freeze/Thaw Stability: Stable Percent Volatile: 100% Specific Gravity: 0.79 Storage Life: 24 months in unopened containers under 50°F LIMITATIONS Titebond® Instant Bond Accelerator is not intended for exterior use or where moisture is likely. Store in a cool, dry place. Handling and set times of Titebond® Instant Bond Adhesives may be affected by environmental conditions. Product is extremely flammable. Keep away from heat, sparks and flame. CAUTION STATEMENT Danger: Extremely Flammable Liquid. Vapor Harmful. Contains heptane and methylcyclohexane. Keep away from heat, sparks and flame. Use only with positive cross ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Exposure may cause CNS, eye, skin or respiratory system effects. FIRST AID: If inhaled, remove to fresh air. Seek medical attention if symptoms persist. Eye contact: Flush eye with water for 15 minutes and see medical attention immediately. If swallowed, do not induce vomiting; contact physician immediately. For skin contact, wash contact area with soap and water. Contact physician if irritation persists. Refer to Safety Data Sheet for additional information. KEEP OUT OF THE REACH OF CHILDREN. WARNING: This product contains trace amounts of benzene and toluene, chemicals known to the State of California to cause cancer and birth defects. IMPORTANT NOTICE: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of the product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
- Titebond® Instant Bond Accelerator has been developed as a treating agent for use with Titebond®'s Instant Bond adhesives. If faster setting speeds are desired, Titebond® Instant Bond Accelerator will aid the curing process and give faster set times. It will allow for faster uniform curing. The accelerator will aid the bonding of porous materials such as wood. It is useful when bonding acidic surfaces or in low humidity conditions promoting consistent curing times. Using Accelerator will enable the adhesive to fill gaps up to 0.20".
Attributes
Ship via: Can Ship UPS