Hafele 003.55.008 Titebond Pro-Grade Plus CaulkHafele 003.55.008 Titebond, Pro-Grade Plus Caulk is your reliable solution for both interior and exterior sealing needs. This dark bronze caulk is designed to effectively seal joints, repair cracks, and fill gaps, ensuring a water-resistant barrier that stands the test of time. Its versatility allows it to be painted with a water-based latex paint in just 2-4 hours after application, while the clear version can be painted in 4-6 hours, making it suitable for various projects. With an application temperature requirement of above 40°F, this caulk covers approximately 31 feet with a 1/4" bead from a 10.1 oz cartridge. The working time is approximately 10-15 minutes, allowing ample time for proper application. It’s essential that surfaces are clean, dry, and free from contaminants for optimal adhesion. Cleanup is a breeze as uncured material can be washed away with water. However, it's important to note that this caulk is not designed for continuous submersion or use below the waterline. For best results, store in a dry place at or below 75°F. Trust Hafele’s Pro-Grade Plus Caulk to deliver professional-grade performance with ease and efficiency.
Titebond, Pro-Grade Plus Caulk
Dark bronze
For interior and exterior applications Seals joints, repairs cracks and fills gaps Paintable with a water based latex paint after application* Provides a water-resistant seal Tools easily and cleans up with water Complies with the following requirements: ASTM C834 Type OP Grade -18°C ASTM C920 Type S Grade NS Class 25 Pro-Grade Plus Clear is paintable in 4–6 hours Pro-Grade Plus Colors are paintable in 2–4 hours
APPLICATION GUIDELINES Application temperature: Above 40°F Coverage (maximum): Approximate length of bead according to bead diameter: Container bead: 1/4" bead 10.1 oz cartridge is 31 ft Working time: Approx. 10-15 minutes for a 1/4" bead Working surfaces:Surfaces to be caulked should be clean, dry and free from excess oil, grease, water, dirt or any other material that may deter excess. Properly designed joint not to exceed 1/2" in depth. Cut tip at 45° angle for 1/8" to 1/2" bead and place in professional cartridge gun. Apply caulk into clean joint. If necessary, smooth bead immediately. Cleanup: Clean uncured material with water. After curing, excess sealant must be cut or scraped away. LIMITATIONS Not designed for continuous submersion or use below the waterline. Air, caulk and surface temperature should be above 40°F. Do not apply if rain is expected within 12 hours. Clear sealant will be white during application but will clear within 7-14 days. Cure time is dependent upon ambient conditions including temperature and humidity. The caulk should be dry to the touch and ready to paint in 2-4 hours with a water-based (latex) paint that does not contain plasticizer. Clear is paintable in 4-6 hours. For other paint types, a compatibility test is recommended. It is highly recommended to use backing material. For best results, store in a dry location at or below 75°F.
Attributes
Ship via: Can Ship UPS
Color/finish: Bronze colored
Resources