Images may not represent actual product and finish

Thumbnail

Hafele 003.57.150

Your Price: $11.26

Retail Price:$15.01

You Save:$3.75(25%)

Titebond, No-Run, No-Drip Glue, 16 oz.

Part Number: HAF_00357150

Availability: Ready to Ship

Quantity

Description

Hafele 003.57.150 Titebond

APPLICATION GUIDELINES Application temperature: Above 50°F. Assembly time after glue application: 3-5 minutes (70°/50% RH) Total assembly time: 10-15 minutes (70°F/50% RH) Minimum required spread: Approximately 6 mils or 250 square feet per gallon Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods ands and 175-250 psi for hardwoods) Methods of application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush. Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess. LIMITATIONS Not intended for exterior use or where moisture is likely. For extension applications, use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Do not use when temperature, glue or materials are 55°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. NOTE: KEEP FROM FREEZING.
BOND STRENGTH ASTM D-905 (On Hard Maple) Temperature Strength psi % wood failure Room Temperature 3,000 7 150°F Overnight 650 0
Easy cleanup with water
Excellent sandability
Extra-thick formula helps fill small cracks and gaps
No-runs, no-drips
Nonflammable - no offensive odor
Strong initial tack
Unaffected by finishes
Versatile - bonds most porous and semi-porous materials
APPLICATION GUIDELINES Application temperature: Above 50°F. Assembly time after glue application: 3-5 minutes (70°/50% RH) Total assembly time: 10-15 minutes (70°F/50% RH) Minimum required spread: Approximately 6 mils or 250 square feet per gallon Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods ands and 175-250 psi for hardwoods) Methods of application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush. Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess. BOND STRENGTH ASTM D-905 (On Hard Maple) Temperature Strength psi % wood failure Room Temperature 3,000 7 150° Overnight 600 0 LIMITATIONS Not recommended for exterior use or where moisture is likely. For exterior applications, use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. One of the substrates being bonded must be porous or semi-porous. Not recommended for photos, washable wearables, metals, plastics or rubber. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read SDS before use. For wood, sand glued area thoroughly before staining. Store at room temperature. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Attributes

Ship via: Can Ship UPS

Application: For finish trim, crown moulding, baseboards and window casings

Area of application: Specifically designed for wood and provides strong bonds on pottery, ceramics, stone, fabric, glass and most materials

Capacity: (16 oz.) .47 l